35W Fabric Rope Hot Cutter ForTextile Industry Electric

Fabric Rope Hot Cutter And Textile Industry Electric Heating Knife 35W

Product Description:

• Place a piece of fabric rope (preferably waste cloth / check pattern on first use) on different suitable cutting surface.
• Adjust rope cutter the temperature manage wheel to the center position.
• Place the blade on the artificial rope.
• Press and maintain the set off change to warmness the blade.
• Gently push the blade down and in a again and forth movement reduce thru the rope.
• If the temperature is inadequate rotate the temperature dial closer to you (and away from the blade). The maximum
temperature putting is 8, and the minimal is 1. You will observe the purple indicator mild shine brighter the greater the
temperature setting.
• Avoid the blade burning purple hot, ideally do no longer keep the set off change at max electricity for longer than 15 seconds.
• For large ropes it may additionally be vital to reduce the rope in stages, releasing the set off change and permitting the rope cutter and
blade to cool earlier than beginning again. This will assist prolong the life of the rope hot cutter.
• Do no longer follow immoderate pressure when slicing or the blade may additionally come to be warped.

Specifications:

Cutting features: after cutting, the fracture is smooth, no debris, no burr, port melting, one-time molding.

Product List:

Hot Cutter Body*1

Blade*1

Spanner*1

Brush*1

Carton*1

Our advantages:

1. Rongter rope cutter, a variety of models, a variety of power, blade temperature more durable, more smooth cutting

2. Rongter electric hot knife special blade, wider blade, greater heat capacity, faster cutting, long blade life

Matters needing attention:

1. Please read all instructions carefully before using the hot knife rope cutter.

2. The hot knife rope cutter is intended for use on synthetic ropes which will melt on contact with the hot blade. It is not suitable for use with natural fibre ropes or steel cable ropes.

3. By design the blade of the hot knife rope cutter will get very hot during use and will remain hot for a period of time after use.

4 .Always allow sufficient time for the blade to cool down after use and keep the blade away from flammable materials.

5. Never touch the blade while it is hot. The use of heat insulating gloves is recommended but is not required.

6. The hot knife should be used in a well-ventilated environment. Some level of smoke is to be expected during cutting.

7. Always ensure that the hot knife is unplugged from the power socket when removing or installing the cutting blade.

8. Do not use if the power cable or the plug are damaged.

9. Do not use two rope cutters simultaneously as any contact between two blades could cause a short circuit.

10. Do not use the hot knife rope cutter on a wet rope or in the presence of water.

11. Only use the tools and accessories supplied with the hot knife rope cutter

Our Factory:

Suzhou Rongter Mechanical Electrical Co Ltd is a global professional heat cutting tools suppliers and provides the optimal cutting solutions. We develop, produce and sell heat cutting machines and equipment. Our company has been committed to helping various industries to solve a variety of different materials, angles and thicknesses cutting program, enabling them to get rid of the traditional mechanical cutting. Our headquarter is established in Suzhou, and we also provides all kinds of auxiliary cutting tools. We specialize in custom built cutting solutions that are designed to fit your particular needs. All the products we design and build have its own intelligent property, and gain great popularity with users home and abroad for its high technology,excellent quality and long service life. Currently, a lot of customers have been using Rongter products and solutions and they can be found worldwide in Europe, America, Australia, Middle East, Southeast Asia and other countries and regions.